Keysight Technologies 6811C Programming Guide

3 Language Dictionary
192 Keysight Models 6811C, 6812C, and 6813C Programming Guide
SYSTem:SET
Sets up the ac source as defined by the data in the binary block of data from the
computer. A binary block of data, consisting of bytes of setup information. The
numbers of bytes is a dynamic numbers that is read and allocated by the
instrument's firmware.SYSTem:SET query operates the same as the *LRN? query.
SYSTem:VERSion?
This query returns the SCPI version number to which the ac source complies. The
value is of the form YYYY.V, where YYYY is the year and V is the revision number for
that year.
SYSTem:LOCal
It sets the interface in Local state, which enables the front panel controls.
Command syntax SYSTem:SET <binary_block>
Parameters <binary_block>
Examples
SYST:SET #516384…
Query syntax SYSTem:SET?
Returned parameters <binary_block>
Related commands *LRN
Query syntax SYSTem:VERSion?
Parameters None
Examples
SYST:VERS?
Returned parameters <NR2>
Command syntax SYSTem:LOCal
Parameters None
Examples
SYST:LOC
Related commands SYST:REM SYST:RWL

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English