Keysight Technologies 6811C Programming Guide

Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 185
SYSTem:COMMunicate:LAN:SMASk
Assigns a subnet mask for the ac source to use in determining whether a client IP
address is on the same local subnet. When a client IP address is on a different
subnet, all packets must be sent to the Default Gateway. Contact your LAN
administrator for details.
If DHCP is enabled (SYSTem:COMMunicate:LAN:DHCP ON), the specified subnet
mask is not used. However, if the DHCP server fails to assign a valid IP address,
the instrument uses the Auto-IP subnet mask. A value of “0.0.0.0” or
“255.255.255.255” indicates that subnetting is not being used.
– CURRent: Returns address currently being used by the instrument.
– STATic: Returns static address from non-volatile memory. This address is used
if DHCP is disabled or unavailable.
– SYSTem:SECurity:IMMediate sets this parameter to its default value.
This setting is non-volatile; it is not changed by power cycling, *RST, or
SYSTem:PRESet.
If you change this setting, you must send SYSTem:COMMunicate:LAN:UPDate to
activate the new setting.
Command syntax SYSTem:COMMunicate:LAN:SMASk <quoted_address>
Parameters <quoted_address>
Examples
SYST:COMM:LAN:SMAS “12.168.10.1”
Query syntax SYSTem:COMMunicate:LAN:SMASk?
Parameters [CURRent | STATic] (Default: CURRent)
Examples
SYSTem:COMMunicate:LAN:SMAS?
Returned parameters <SRD>

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English