A SCPI Command Tree
276 Keysight Models 6811C, 6812C, and 6813C Programming Guide
Command Syntax
The following subsystem commands are listed in this appendix:
– “CALibrate | CALibration” on page 277
– “DISPlay” on page 278
– “LXI” on page 279
– “MEASure | FETCh” on page 280
– “OUTPut” on page 282
– “SENSe” on page 283
– “[SOURce:]” on page 284
– “STATus” on page 288
– “SYSTem” on page 289
– “TRACe | DATA” on page 291
– “TRIGger” on page 292
– “SCPI Common Commands” on page 293
To Next Page
Loading...
