Keysight x-series User Reference Guide

12 Disturbance Analyzer Measurement
Cont
Cont
There is no Cont Mode in the Disturbance Analyzer measurement. Pressing the Cont key will show error
message “Settlings conflict; Cont Mode is not available”.
Key Path
Front Panel Key
Initial S/W Revision A.14.00
EMI Receiver Mode Reference 1035

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)