Keysight x-series User Reference Guide

3 Programming the Analyzer
STATus Subsystem
bit 6) to your numeric sum when you enable any bits for a service request. The command *SRE? returns the
decimal value of the sum of the bits previously enabled with the *SRE <integer> command.
The service request enable register presets to zeros (0).
Standard Event Status Register
The standard event status register contains the following bits:
108 EMI Receiver Mode Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)