Keysight x-series User Reference Guide

10 Monitor Spectrum Measurement
AMPTD Y Scale
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback dBmV
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00
dBmA
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBmA.
Key Path
AMPTD Y Scale, Y Axis Unit
Example UNIT:POW DBMA
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback dBmA
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00
W
Sets the amplitude unit for the selected amplitude scale (log/lin) to watt.
Key Path
AMPTD Y Scale, Y Axis Unit
Example UNIT:POW W
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback W
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00
V
Sets the amplitude unit for the selected amplitude scale (log/lin) to volt.
Key Path
AMPTD Y Scale, Y Axis Unit
Example UNIT:POW V
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback V
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00
736 EMI Receiver Mode Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)