Keysight x-series User Reference Guide

6 System Functions
System
If this control is entered without an external keyboard or mouse connected, you can cancel the control by
pressing the Cancel (ESC) front-panel key.
Key Path
System, I/O Config
Mode All
Initial S/W Revision Prior to A.02.00
LXI
Opens a menu that allows you to access the various LXI configuration properties.
Key Path
System, I/O Config
Initial S/W Revision Prior to A.02.00
LAN Reset
Resets the LAN connection.
Key Path
System, I/O Config, LXI
Initial S/W Revision Prior to A.02.00
Device Identification (Remote Command Only)
Enabling the LXI device identification will place the LXI Status Indicator to the ‘Identify’ state. Disabling the
LXI device identification will place the LXI Status Indicator to the ‘No Fault’ state. The LXI Status indicator
is in the upper left region of the instrument’s graphical user interface ( ).
Mode All
Remote Command
:LXI:IDENtify[:STATe] OFF|ON|0|1
:LXI:IDENtify[:STATe]?
EMI Receiver Mode Reference 337

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)