Keysight x-series User Reference Guide

6 System Functions
System
The CXA models in which the AC/DC Switch field is called Fixed Atten and that omit the mechanical
attenuation fields are the N9000A–503/507 models.
Modular HWs only have time and temperature information in Show Hardware Statistics.
The data will be updated only when the Show Hardware Statistics menu key is pressed, it will not be
updated while the screen is displayed.
The tabular data should be directly printable.
Key Path
System, Diagnostics
Mode All
Notes The values displayed on the screen are only updated upon entry to the screen and not updated while
the screen is being displayed.
Initial S/W Revision Prior to A.02.00
SCPI for Show Hardware Statistics ( Remote Commands Only)
Each of the hardware statistic items can be queriedvia SCPI.
• "Query the Mechanical Relay Cycle Count" on page 351
• "Query the Operating Temperature Extremes" on page 351
• "Query the Elapsed Time since 1st power on" on page 351
350 EMI Receiver Mode Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)