8 Frequency Scan Measurement
Meas Setup
Continuous
The scan will run continuously until you stop it by pressing the Stop key in the Sweep Control menu.
Key Path
Meas Setup, Scan Sequence
Example FSC:SEQ SCAN
Dependencies This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a “–221, Settings conflict” warning.
Initial S/W Revision A.07.00
Search Only
When this key is selected, pressing Start performs a search. See Section "Scan Sequence" on page 471. If
there are no valid peak signals found, an error is generated saying “No peak signals found”.
Key Path
Meas Setup, Scan Sequence
Example FSC:SEQ SEAR
Dependencies This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a “–221, Settings conflict” warning.
Initial S/W Revision A.07.00
Remote Command
:CALCulate[1]|2:PEAKsearch|PSEarch[:IMMediate]
Example CALC:PEAK
Notes This command is included for ESU compatibility. The suffix [1]|2 is irrelevant to the measurement,
they are added solely for remote language compatibility
This ESU Command is alias to FSC:SEAR:PEAK:COUN:STAT ON; FSC:SEQ SEAR;INIT.
Scan, Search and Measure
When this key is selected, pressing Start performs a scan, search, and a final measuremen. The scan will
stop automatically and continue to search when the specified # of scans is complete regardless of
Single/Continuous scan setting. See Section "Scan Sequence" on page 471 for more information.
Key Path
Meas Setup, Scan Sequence
Example FSC:SEQ SSAM
Dependencies This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a “–221, Settings conflict” warning.
Initial S/W Revision A.07.00
474 EMI Receiver Mode Reference
To Next Page
Loading...
Need help?
General
