Keysight x-series User Reference Guide

12 Disturbance Analyzer Measurement
Meas Setup
Couplings Selecting the ∆ Detector type to be sorted (pressing the key or sending the equivalent SCPI
command) will turn on the Auto Sort state, even if that ∆ Detector type was already selected.
Preset DET1
State Saved Saved in instrument state.
Range Detector 1|Detector 2|Detector 3
Initial S/W Revision A.07.00
Meas Preset
This key returns the Meas Local variables in the Disturbance Analyzer measurement to their preset values.
This is the same as sending the SCPI command CONF:DAN.
Key Path
Meas Setup
Initial S/W Revision A.14.00
EMI Receiver Mode Reference 1071

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)