Keysight x-series User Reference Guide

12 Disturbance Analyzer Measurement
Meas Setup
[:SENSe]:DANalyzer:CRATe:TYPe?
Example DAN:CRAT:TYP MEASured
DAN:CRAT:TYP?
Preset MEASured
State Saved Saved in instrument state
Range MEASured |USER
Readback Text MEASured |USER
Initial S/W Revision A.14.00
Display Setup Table
Turns on and off the setup table. Once you turn off the setup table display, it will stay off even when you
press the Setup Table key.
Key Path
Meas Setup, Setup Table
Remote Command
:CALCulate:DANalyzer:TABLe:DISPlay OFF|ON|0|1
:CALCulate:DANalyzer:TABLe:DISPlay?
Example CALC:DANalyzer:TABLe:DISP OFF Turn off display setup.
CALC:DANalyzer:TABLe:DISP?
Preset ON
State Saved Saved in instrument state
Range OFF|ON|0|1
Initial S/W Revision A.14.00
Duration
Specifies the max duration of the recorded traces data in a graph.
Key Path
Meas Setup, Setup Table
Initial S/W Revision A.14.00
Click Correction
Specifies the amplitude of the correction.
Key Path
Meas Setup, Setup Table
Remote Command
[:SENSe]:DANalyzer:CLICk:CORRection <rel_amptd>
[:SENSe]:DANalyzer:CLICk:CORRection?
Example DAN:CLIC:CORR –10 dB
EMI Receiver Mode Reference 1069

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)