5 Mode Functions
Mode
SCPI Language Compatibility
The SCPI Language Compatibility mode provides remote language compatibility for SCPI-based
instruments, such as the Rohde and Schwartz FSP and related series of spectrum analyzers.
After changing into or out of this mode, allow a 1 second delay before sending any subsequent commands.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Mode
Example INST:SEL SCPILC
Or
INST:NSEL 270
Initial S/W Revision A.06.00
Spectrum Analyzer
Selects the Spectrum Analyzer mode for general purpose measurements. There are several
measurements available in this mode. General spectrum analysis measurements, in swept and zero span,
can be done using the first key in the Meas menu, labeled Swept SA. Other measurements in the Meas
Menu are designed to perform specialized measurement tasks, including power and demod
measurements.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Mode
Example INST:SEL SA
INST:NSEL 1
Initial S/W Revision Prior to A.02.00
TD-SCDMA with HSPA/8PSK
Selects the TD-SCDMA mode for general purpose measurements of signals following this standard. There
are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Mode
Example INST:SEL TDSCDMA
INST:NSEL 211
Initial S/W Revision Prior to A.02.00
242 EMI Receiver Mode Reference
To Next Page
Loading...
Need help?
General
