Keysight x-series User Reference Guide

6 System Functions
System
Miscellaneous Setting Default Value
SCPI Telnet ON
SCPI Socket ON
SICL Server ON
Softkey Language English
System Annotation ON
Display Theme TDColor
System IDN Response Factory result of *IDN?
Display Intensity 100
Display Backlight ON
GPIB Address
18
Confirmation is required to restore the factory default values. The confirmation dialog is:
Key Path
System, Restore System Defaults
Example :SYST:DEF MISC
Initial S/W Revision Prior to A.02.00
Restore Mode Defaults (All Modes)
This selection resets all of the modes in the instrument back to their default state just as a Restore Mode
Defaults does and it switches the instrument to the power-on mode and causes the default measurement
for the power-on mode to be active. This level of Restore System Defaults does not affect any system
settings, but it does affect the state of all modes and does cause a mode switch unless the instrument was
already in the power-on mode.
Confirmation is required to restore the factory default values. The confirmation dialog is:
EMI Receiver Mode Reference 343

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)