Keysight x-series User Reference Guide

12 Disturbance Analyzer Measurement
Meas Setup
Key Path
Meas Setup, Setup Table
Remote Command
[:SENSe]:DANalyzer:FREQuency F150KHZ | F500KHZ | F1400KHZ | F30MHZ |
MANual
[:SENSe]:DANalyzer:FREQuency?
Example DAN:FREQ F150KHZ
DAN:FREQ?
Preset 150 kHZ
State Saved Saved in instrument state
Range F150kHZ|F500kHZ|F1400kHZ|F30MHZ|MANual
Initial S/W Revision A.14.00
150 kHZ
Sets the Frequency to 150 kHz.
Key Path
Meas Setup, Setup Table, Frequency
Example DAN:FREQ F150KHZ
Readback Text 150 kHZ
Initial S/W Revision A.14.00
500 kHZ
Sets the Frequency to 500 kHz.
Key Path
Meas Setup, Setup Table, Frequency
Example DAN:FREQ F500kHZ
Readback Text 500 kHZ
Initial S/W Revision A.14.00
1400 kHZ
Sets the Frequency to 1400 kHz.
Key Path
Meas Setup, Setup Table, Frequency
Example DAN:FREQ F1400 kHZ
Readback Text 1400 kHZ
Initial S/W Revision A.14.00
EMI Receiver Mode Reference 1065

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)