Keysight x-series User Reference Guide

8 Frequency Scan Measurement
Save
• Int Preamp Band
• Int Preamp State
• Log Percentage
• Meas Time
• Meas Time Mode
• Point/RBW
• RBW
• RBW Mode
• RF Input
• Scan Points
• Scan Points Mode
• Scan Time
• Scan Time Mode
• Start Freq
• State
• Step Auto Mode
• Step Size
• Step Size Mode
• Step Time Control
• Stop Freq
Here is an example of scan table file:
ScanTable
EMI:FSCAN
A.12.08,N9030A
526 ALV B25 B40 CR3 CRP DP2 EA3 EMC EP1 FSA LFE LNP MPB NFE NUL P26 PFR RTL YAV ,01
Step Time Control,Step Size & Dwell Time
State,OFF,OFF,OFF,OFF,ON,OFF,OFF,OFF,OFF,OFF
Start
Freq,9000,150000,30000000,300000000,30000000,1000000000,1000000000,1000100000,1000200000,1000300000
Stop
Freq,150000,30000000,300000000,1000000000,1000000000,18000000000,1000100000,1000200000,1000300000,1
000400000
RBW,200,9000,120000,120000,120000,1000000,1000000,1000000,1000000,1000000
RBW Mode,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO
556 EMI Receiver Mode Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)