Keysight x-series User Reference Guide

9 Strip Chart Measurement
Marker Function
Key Path
Marker Function
Remote Command
CALCulate:SCHart:MARKer[1]|2|...12:FUNCtion:ZOOM:CLEar
Example CALC:SCH:MARK1:FUNC:ZOOM:CLE
Notes You must be in the mode that includes Strip Chart measurement to use this command. Use
INSTrument:SELect to set the mode.
Dependencies Marker Zoom Out Full key is not available if Marker Zoom was not executed previously.
Initial S/W Revision A.07.00
EMI Receiver Mode Reference 641

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)