Keysight x-series User Reference Guide

10 Monitor Spectrum Measurement
FREQ Channel
values are undefined until the next scan/final measurement.
Key Path
Freq
Remote Command
:CALCulate:MONitor:SLISt:APPend:METer
Example CALC:MON:SLIS:APP:MET
Notes If there is no free space in the signal list, you will be prompted by a message that asks whether to
continue or not: WARNING! There is not enough free space in Signal List. Would you like to clear the
Signal list before adding signals? Press ENTER to continue or ESC to Cancel.
If the user sends the SCPI command when there is no free space in the signal list, the application will
just clear the signal list. Pop up is only for key press.
Couplings The appended signal will be the selected signal after Metersà List is performed.
Initial S/W Revision A.13.00
756 EMI Receiver Mode Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)