Lenze 9300 - During Operation; Status Indications; Display on the Controller; Display on the Keypad

During operation
6-1
L EDSVS9332P-C EN 3.0
6 During operation
6.1 Status indications
6.1.1 Display on the controller
Two LEDs at the front of the controller indicate the controller status.
LED green LED red Caus e Check
  Controller enabled; no fault
  Controller inhibit, switch-on inhibit C0183; or C0168/1
  Fail C0168/1
  Warning, fail-QSP C0168/1
 :on  :off  : blinking
6.1.2 Display on the keypad
Status indications in the display indicate the controller status.
Display Cont roller status Check
RDY Controller ready for operation, controller can be inhibited C0183, C0168/1
IMP Pulses at the power stage inhibited C0183, C0168/1
I
max
Max. current reached
M
max
Max. torque reached
Fail Fault through TRIP, message, fail-QSP or warning C0183, C0168/1
Show/Hide Bookmarks