Configuration
7-1
L
EDSVS9332P-D21 EN 3.0
Part D2.1
7 Configuration
In practice every application requires an adjusted controller-internal configuration. For this, a great
number of different function blocks are available, which must be linked in a suitable way.
(E 7-7)
7.1 Configuration with Global Drive Control
With Global Drive Control (GDC), LENZE offers an easy-to-understand, clearly-laid-out and
convenient tool for the configuration of your specific drive task.
Function block library
GDC provides an easy-to-read library of available function blocks (FB). GDC also displays the
complete assignment of an FB.
Signal configuration
The signal configuration is done with only one dialog box. It is a convenient way
•
to display every FB as a block diagram.
•
to see the assignment of all signal inputs at a glance.
•
to enter the FB in the processing table.
•
to print your signal configuration.
Terminal assignment
Freely assignable terminals can be configured using two dialog boxes:
•
Dialog box - to link digital inputs and outputs.
•
Dialog box - to link analog inputs and outputs.
Tip!
Further information can be obtained from the Manual for your controller.
To Next Page
Loading...
