Lenze 9300 - Configuration; Predefined configurations; Working with predefined configurations

During operation
6-2
L
EDSVS9332P-C EN 3.0
6.1.3 Display in Global Drive Control
1. Click on the ”Control” buttoninthe”Basic settings” dialog box.
2. Click on the ”Diagnostics” buttoninthe”Control” dialog box.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Fig. 6-1 ”Diagnostic 9300” dialog box
1Typeoffault
2 Actual speed
3 Actual motor voltage
4 Actual motor current
5 Motor torque
6DCbusvoltage
7 Heatsink temperature
8 Motor temperature
9Driveload
10 Reset fault
11 Time when the supply voltage was applied
12 Time when the controller was enabled
13 Actual fault with time and frequency of the fault. E 8-3
14 Fault history with time and frequency of the fault. E 8-3
15 Reset history buffer. E 8-4
Show/Hide Bookmarks