Lenze 9300 - Fault Message (OC5)

Configuration
7-304
L
EDSVS9332P-D21 EN 3.0
7.6.3.10 Fault message (OC5)
200%
150%
100%
70%
10s
60s
120s
180s
time
Controller output current *
Ixt diagram
(100% load)
for C0022 ≤ 150 I
rx
70% thermal continuous current
for C0022 > 150% I
rx
* rated controller current 100%
x depending on the chopping frequency of the inverter
100% thermal continuous current
K35.0151
Fig. 7-243 Max. permitted overcurrent depending on the time
Show/Hide Bookmarks