Function library
7-216
L
EDSVS9332P-D21 EN 3.0
7.5.59 Limiter (LIM)
Purpose
This FB is used to limit signals to ranges which can be set.
LIM1
LIM1-OUT
LIM1-IN
C0633
C0630
C0631
C0632
Fig. 7-172 Limiter (LIM1)
Signal
Source Note
Name Type DIS DIS format CFG List Lenze
LIM1-IN1 a C0633 dec [%] C0632 1 1000 -
LIM1-OUT a - - - - - -
Function
•
If the input signal exceeds the upper limit (C0630), the upper limit is effective.
•
If the input signal falls below the lower limit (C0631), the lower limit is effective.
Tip!
The lower limit (C0631) must be smaller than the upper limit (C0630).
To Next Page
Loading...
