Function library
7-215
L
EDSVS9332P-D21 EN 3.0
Function
t
t
FLIPx- D
FLIPx- CLK
t
FLIPx- OUT
Fig. 7-171 Sequence of a flipflop
•
The input FLIPx-CLR always has priority.
•
If a HIGH level is applied at the input FLIPx-CLR, the output FLIPx-OUT is set to a LOW level
and maintained until this input is applied to a HIGH level.
•
With a LOW-HIGH edge at the input FLIPx-CLK, the level at the input FLIPx-D is switched to
the output and saved until
– another LOW-HIGH edge is applied at the input FLIPx-CLK or
– the input FLIPx-CLR is applied to a HIGH level.
To Next Page
Loading...
