Lenze 9300 - Function 4: |CMP1-IN1| = |CMP1-IN2; Function 5: |CMP1-IN1| > |CMP1-IN2; Function 6: |CMP1-IN1| < |CMP1-IN2

Function library
7-146
L
EDSVS9332P-D21 EN 3.0
7.5.32.4 Function 4: |CMP1-IN1| = |CMP1-IN2|
This function is the same as function 1. Before signal processing the amount of the input signals
(without sign) is generated.
Example:
This function is used to obtain the comparison ”n
act
=0”.
7.5.32.5 Function 5: |CMP1-IN1| > |CMP1-IN2|
This function is the same as function 3. Before signal processing the amount of the input signals
(without sign) is generated.
Example:
This function is used to obtain the comparison ”|n
act
|>|n
x
|” irrespective of the direction of rotation.
7.5.32.6 Function 6: |CMP1-IN1| < |CMP1-IN2|
This function is the same as function 2. Before signal processing the amount of input signals (without
sign) is generated.
Example:
This function is used to obtain the comparison ”|n
act
<n
x
|” irrespective of the direction of rotation.
Show/Hide Bookmarks