Configuration
7-320
L
EDSVS9332P-D21 EN 3.0
7.7.2 Structure of a parameter set
For easy operation, menu levels for the 9371BB keypad and the PC programs Global Drive Control
and LEMOC2 lead you quickly to the codes required:
•
Main menu
– contains submenus
– containsthecompletecodelist
•
Submenus
– contain the codes which are assigned to them
Codes consist of:
•
Code level
– codes without subcodes contain one parameter
– codes with subcodes contain several parameters
•
Parameter level/operating level
There are four different parameter types:
– Absolute values of a physical variable
(e. g. 400 V, 10 s)
– Relative values of instrument variables
(e.g. 50 % setp oint )
– Numbers for certain states
(e.g. 0 = controller inhibited, 1 = controller enabled)
– Display values
These values can only be displayed but not changed.
(e.g. actual motor current under C0054)
You can change absolute and relative values in discrete steps.
To Next Page
Loading...
