Lenze 9300 - Complete BCD Reading

Function library
7-123
L
EDSVS9332P-D21 EN 3.0
7.5.28.6 Complete BCD reading
1
2
3
+/-
MSB
LSB
BCDx-SIGN
BCDx-SEL1
BCDx-SEL2
BCDx-SEL3
BCDx-DATA1
BCDx-DATA
2
BCDx-DATA
3
BCDx-DATA
4
9300
BCDx-SEL4
Fig. 7-84 Cancel after the 3rd absolute value digit (diode circuit)
Function
Reading can be shortened if BCDs are not required.
• TheFBdoesnotreadthefollowingBCDsifthevalueA
hex
(1010
bin
)for”ABORT” is transmitted
after a BCD has been read. The reading stops with the identification of ”ABORT”.
• In the case of the abort via a value digit, the least significant bit (LSB) is to be assigned with
”ABORT”, because the reading sequence stops at the least significant bit.
• In the handshake mode, ”CANCEL” should be identified at the beginning of the data
transmission (see also the following chapter).
Show/Hide Bookmarks