Lenze 9300 - Dig-Set Monitoring Sd3

Configuration
7-317
L
EDSVS9332P-D21 EN 3.0
7.6.3.22 Dig-Set monitoring Sd3
Purpose
Process monitoring
MONIT
MONIT-SD3
4V
X10
Fig. 7-253 Dig-Set monitoring Sd3
Signal
Source Note
Name Type DIS DIS format CFG List Lenze
X10 - - - - - - -
MONIT-SD3 d - - - - - -
Function
The monitoringSd3 reacts if pin 8 at the digital frequency input X9 is not supplied. Therefore, an
interrupt of the digital frequency coupling can be displayed.
Features:
• LECOM no.: 83, 2083
• Reaction: TRIP, WARNING or OFF
Show/Hide Bookmarks