Commissioning
5-12
L
EDSVS9332P-C EN 3.0
5.7 Function test with manual control
Test the function with manual control after every new or modified configuration.
Warning!
Provide suitable emergency stops for manual operation so that you will be able to stop the drive in
the event of unpredictable movements.
9300pos041
Fig. 5-7 Dialog box ”Control”
Field
Command Function
3 Select ”Manual operation” Manual operation active
5 With drive status ”OK”, ”Start” is possible E 6-2.
4 Controller ”Start” Starts the controller if there is no interference.
2
Select ”Positive manual” The drive moves in the positive direction towards the limit s witch.
•
Test positioning limits
•
Override travel range limit switch to test its function.
Reset ”Positive manual” The drive stops.
To Next Page
Loading...
