Function library
7-98
L
EDSVS9332P-D21 EN 3.0
Function
The input signals of the 8-byte user data of the AIF object are converted into corresponding signal
types. The signals can be used via further function blocks.
Byte 1 and 2
Byte 1 and 2 form the control word for the controller. The bits 3, 8, 9, 10, and 11 of these bytes are
directly transferred into the function block DCTRL where they are linked with further signals. The
other 11 bits can be used to control further function blocks.
Byte 3 and 4
form the signal to AIF-IN.W1.
Byte 5, 6, 7, and 8
The meaning of these user data can be selected among different signal types. According to the
requirement these data can be evaluated as up to two analog signals, 32 digital signals or one phase
signal. Mixed forms are also possible.
To Next Page
Loading...
