Function library
7-137
L
EDSVS9332P-D21 EN 3.0
Function
The input signals of the 8-byte user data of this AIF object are converted into corresponding signal
types. The signals can be used via further function blocks.
Byte 1, 2, 3, and 4
The meaning of these user data can be selected among different signal types. According to the
requirement these data can be evaluated as up to two analog signals, 32 digital signals or one phase
signal. Mixed forms are also possible.
Byte 5 and 6
form the signal to CAN-IN3.W3.
Byte 7 and 8
form the signal to CAN-IN3.W4.
To Next Page
Loading...
