This documentation is valid for 9300 po sition con t rollers as of version:
33.932X EP 2x 2x (9321 - 9329)
33.933X EP 2x 2x (9330 - 9332)
33.932X CP 2x 2x - V003 Cold Plate (9321 - 9328)
Type
Design:
EP = Built-in unit IP20
CP = Cold Plate
Hardware version and index
Software version and index
Variant
Explanation
© 2004 Lenze Drive Systems GmbH, Hameln
No part of these Instructions must be copied or given to third parties without written approval of Lenze Drive Systems GmbH.
All indications given in this documentation have been selected carefully and comply with the hardware and software described.
Nevertheless, deviations cannot be ruled out. We do not take an y responsibility or liability for damages which might possibly occur. Necessary
corrections will be included in the next edition.
3.0 11/2004
To Next Page
Loading...
