EasyManua.ls Logo

Linx 4900 - Page 226

Linx 4900
284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix D: System Event Messages
MP65492–1 207 Linx 4900 Operating Manual
3.20 No Time Of Flight
3.26 User Data Corrupt—Contact your local Linx
Service Centre
3.29 No Message Stored
3.30 Message Name Exists
Description: The printer failed to obtain a TOF reading over a 5-
minute period after jet start. If this condition continues
for a further 35 minutes, a “2.03 Time of Flight” failure
occurs, and the printer shuts down.
Cause(s): Partly blocked nozzle.
Jet misalignment.
Shaft encoder wheel stopped turning.
Solution: Clean the printhead; perform a Nozzle Flush and a
Nozzle Clear. See Chapter 7, ‘Diagnostics and
Maintenance’.
Restart production line.
If failure persists, contact your local Linx distributor.
Description: Internal software error.
Cause(s): Invalid data in memory.
Solution: Contact your local Linx distributor.
Description: The message store is empty. Printing cannot be started
when there are no messages.
Cause(s): No messages currently exist in the message store.
Battery backup has failed.
Solution: Create a new message.
If failure persists, contact your local Linx distributor.
Description: A new message name has been entered that is the same
as the name of an existing message.
Cause(s): Duplicate message name.
Solution: Enter a different (unused) message name.
4900 Op Manual.book Page 207 Tuesday, September 9, 2003 12:32 PM

Table of Contents

Related product manuals