Appendix D: System Event Messages
Linx 4900 Operating Manual 208 MP65492–1
3.31 Message Memory Full
3.32 Remote Error
Description: The message store has reached its maximum capacity.
Cause(s): The maximum permissible number of messages has
been created.
Solution: To create another new message, you must first delete an
existing message from the message store.
Description: There is a problem with the remote communications
interface.
Cause(s): The printer has received the ‘Set Remote Error’
command (121) through the remote interface.
Solution: Contact your on-site remote communications
administrator.
If failure persists, contact your local Linx distributor.
4900 Op Manual.book Page 208 Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
Need help?
General
