Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
Operating Instructions GMK5250L 3 302 633 en 4 - 15
27.09.2017
This section relates to starting a warm and cold engine.
• Wait until the start menu is displayed before switching on the ignition.
• Do not press the accelerator.
• Turn the ignition key to position 3 and hold it there until the engine starts.
• Let go of the ignition key after the engine starts.
If the engine does not start, release the ignition key after approx. 15 seconds
and wait one minute before trying again.
H
If the engine does not start after multiple attempts; Ã Malfunctions on the
engine
, p. 7 - 17.
S
Danger of explosion when using starter fuel!
The engine may never be started with the aid of starter fuel. Starter fuel
sprayed into the suction unit can ignite.
S
Risk of malfunctions in the carrier electronics!
Always wait until the start menu is displayed before starting the engine.
This prevents malfunctions in the electronics and corresponding error
messages in the subsequent driving operation.
To Next Page
Loading...
Need help?
General
