Driving modes and rigging for on-road driving
6.4 Rigging the main boom
6 - 30 3 302 633 en Operating Instructions GMK5250L
27.09.2017
Connecting The number of hoses/cables depends on how the truck crane is equipped.
• Remove the bridging plugs (1).
• Connect the plugs (2) to the sockets.
The assignment is given by the number of
poles and the shape of the plug.
• Connect all hoses (3).
The assignment is given by the size and
colour designations.
• Lay the hoses/cables so that they will not be
damaged.
S
Risk of malfunction in the superstructure electronics!
Always turn off the ignition in the crane cab before you establish or sepa-
rate the electrical connection. This prevents malfunctions in the electronics
and corresponding error messages in the subsequent crane operation.
To Next Page
Loading...
Need help?
General
