Crane operation
10.6 Settings and displays for crane operation
10 - 128 3 302 633 en Operating Instructions GMK5250L
27.09.2017
Manually
swinging
Swing upwards
• Press the button (1) in at the top.
Turn downwards
• Press the button (1) in at the bottom.
The direction of the spotlights will be adjusted until you let go of the button
or they reach their end position.
The automatic load tracking can be switched on via the
Spotlights menu.
• Open the Spotlight menu (1).
•
Automatic load
tracking
The pivoting spotlights must be manually aligned onto the load. You can
then switch on the automatic load tracking. The spotlights automatically fol-
low the load. You can adjusting the pivoting speed of the spotlights.
• Switch on the automatic load tracking –
symbol (2).
You can adjust the pivoting speed:
• Open the submenu (5).
Speed can be
– increased with (3),
– decreased with (4).
Switch off the automatic load tracking –
symbol (1).
To Next Page
Loading...
