Rigging work
11.11 Other rigging work
Operating Instructions GMK5250L 3 302 633 en 11 - 133
27.09.2017
Attaching/detach-
ing fall prevention
safety system to/
from safety
harness Attachment
All points designed for fastening a fall prevention safety system are marked
with a symbol.
• When stepping, observe the following procedure so that you are always
secured.
• Always ascend the truck crane using only
the ladders and access ladders provided.
• Make sure you always attach one line of the
fall prevention safety system with the safety
harness before entering the main boom.
• Attach the second line of the fall prevention
safety system with the safety harness once
you are located on the main boom.
s
G
Risk of accidents due to incomplete safety system!
Make sure you always attach one line of the fall prevention safety system
with the safety harness before stepping onto the main boom.
This will prevent falling due to an incomplete safety system.
To Next Page
Loading...
