Hold/Transfer/During Conversation
¾ 4-27 ¾
OPERATION:
<Method 1>
To establish an outside call:
<KTS>
1. Establish an outside call.
2. Press CONF key.
3. Press ICM key.
4. Dial extension number of invited inside party. This party must answer using the handset.
5. Press CONF. Conference established. To add more inside parties, repeat steps 2-5.
<SLT>
1. Establish an outside call.
2. Flash Hookswitch.
3. Dial 93.
4. Dial extension number of invited inside party.
5. Flash Hookswitch.
Conference established. To add more inside parties, repeat steps 2-5.
<KTS/SLT>
To join an Add-On Conference when invited:
1. Lift handset.
<Method 2>
To establish an Add-On Conference:
<KTS only>
1. Establish outside call.
2. Press CONF key.
3. Press ICM key and call the other telephones by paging and tell the Line key number. The called
parties must press the Line key to join.
4. Press CONF key.
To join an Add-On Conference when invited:
1. Lift handset.
2. Press Line key.
RELATED SYSTEM DATA:
#16-D: Add-On Conference Setup Mode
u
Multi-Line Conference
DESCRIPTION:
Multi-Line Conference allows an extension user to establish an outside call and then add another outside
party to the conversation.
- If desired, the user can add five more inside parties to the conversation (for a total of six inside and two
outside parties).
- Another extension user can join (break into) the Conference using Break-In as long as the total number
of inside parties does not exceed six.
STATION APPLICATION:
KTS, SLT
OPERATION:
To establish a Multi-Line Conference:
<KTS>
1. Establish first outside call.
2. Press CONF key. Call is put on Hold.
3. Establish second outside call.
4. Press CONF key. Conference is established.
To Next Page
Loading...