Intercom Outgoing Call
¾ 4-39 ¾
n
nn
n Camp-On (Callback)
DESCRIPTION:
Instead of hanging up after calling a busy extension, Camp-On lets an extension user dial a code and
wait off-hook until the extension becomes available. As soon as the extension becomes free, the call
automatically goes through. Or, if the extension user hangs up after dialing the code, Callback
automatically redials a busy extension. When the busy extension becomes free, Callback signals (rings)
the extension that activated it. When the Callback signal is answered, an Intercom call is automatically
placed to the previously busy extension. Calls can be placed while waiting for the Callback signal, and
Callback can be activated for more than one busy extension at a time. Camp-On/Callback cannot be
activated by an extension that is programmed for Automatic Intercom Off-Hook Signaling (Program #04-
C). Camp-On/Callback can also be activated when a user calls a busy Hunting Group (see Group Hunt).
STATION APPLICATION:
KTS, SLT
OPERATION:
To activate Camp-On:
1. Place Intercom call. Hear busy tone.
2. Dial
*
. Busy tone stops.
3. Do not hang up.
4. Wait for the call to go through. Ringing is heard as soon as the extension becomes free.
To activate Callback:
1. Place Intercom call. Hear busy tone.
2. Dial
*
. Busy tone stops. One beep sounds over the speaker as confirmation.
3. Hang up.
To answer the Callback signal:
- The signal sounds like an Intercom ring, but the ICM key does not flash.
1. Lift handset. Extension is called.
To cancel Callback:
1. Lift handset to cancel Callback before receiving the Callback signal.
2. Hang up.
RELATED SYSTEM DATA:
Not applicable.
n
nn
n Message Waiting
DESCRIPTION:
When an extension user makes an Intercom call and receives a busy signal or no answer, Message
Waiting lets this user leave a visual indication (flashing MW/Indicator light) at the busy/unattended phone
requesting a return call. An extension user can leave Message Waiting indications at several different
extensions.
STATION APPLICATION:
KTS, SLT
OPERATION:
To leave a Message Waiting:
<KTS/SLT>
1. Place Intercom call. Busy or no answer.
2. Dial 0. MW/Indicator flashes intermittently as confirmation (KTS).
3. Hang up.
To Next Page
Loading...