Nitsuko 1232 - Single Line Extension Dial Tone; Special User Password

Other Features
¾ 4-85 ¾
n
nn
n Single Line Extension Dial Tone
DESCRIPTION:
Single Line Telephone Extension Dial Tone is selectable from either Continuous Tone or 0.3sec. ON /
0.2sec. OFF Tone by programming. This assignment is on a system basis. Single Line Extension Dial
Tone for all connected SLTs shall be defined according to Program #78-B
STATION APPLICATION:
SLT
OPERATION:
None
RELATED SYSTEM DATA
#78-B: SLT Dial Tone
n
nn
n Special User Password
DESCRIPTION:
Following Programs can be entered by using “Special User Password” instead of “System Programming
Password”. “Special User Password” is a 10 digit (8737727796) numeric code. The user can, however,
change the password for any other 10 digit code by system programming. The following programs can be
accessed :
- Program #42 : Walking Toll Restriction Security Code
- Program #43 : Toll Restriction Class Assignment on Security Code
- Program #46 : DISA Security Code
- Program #47 : DISA Security Code Extension Assignment
- Program #48 : DISA Toll Restriction Class
- Program #99 : Program Buffer Cancellation
STATION APPLICATION:
KTS (only No.10 extension)
OPERATION:
To Enter Programming Mode :
1. On Hook Condition.
2. Press OPAC key.
3. Dial #, #, .
4. Dial Password. (8737727796)
5. Press HOLD key.
Note: Upon entering Programming Mode, if the Program address for which access is restricted is keyed, the
display indication will go blank, pressing the # key will return the display to normal programming mode.