Intercom Incoming Call
¾ 4-48 ¾
STATION APPLICATION:
KTS
OPERATION:
To put an Intercom call on Hold:
1. Press Hold. (see note)
Note: Do not hang up while an intercom call is on Hold. If you hang up the handset, your intercom call is terminated.
To retrieve an Intercom call on Hold:
1. Press ICM key.
RELATED SYSTEM DATA:
Not applicable.
n
nn
n Intercom Call Transfer
DESCRIPTION:
Intercom calls may be transferred to any extension manually.
There are two methods of transferring Intercom calls.
STATION APPLICATION:
KTS, SLT
OPERATION:
<KTS>
A. To make an Intercom Call Transfer using Intercom Hold:
1. Intercom call between A and B.
2. Press HOLD key to put B on Hold.
3. Extension C dials extension number of A (TX-Z 824/1232/2464).
Extension C dials
*
and extension number of A (TX-Z 308).
- If extension C is SLT, dial access code 08 or 98 then dial extension number of A. (See Note)
4. Intercom call between B and C is established.
Note:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 3
0098
1908
<KTS, SLT>
B. To make an Intercom Call Transfer using Internal Conference (See Conference on Page 4-26 )
1. Intercom call between A and B.
2. Establish an Internal Conference with C.
3. Extension A hang up.
RELATED SYSTEM DATA:
Not applicable.
n
nn
n Call Forward
DESCRIPTION:
(See "Call Forward" page 4-16)
n
nn
n Follow Me
DESCRIPTION:
(See "Follow Me" page 4-18)
To Next Page
Loading...