• 6-36 •
(DFK#7LPHU#$VVLJQPHQW
PROGRAM
TIME ASSIGNMENT TIME
1 = Recall start time
#21
Exclusive Hold Recall
(001-255: 10-2550 sec.)
(000: Not assigned)
2 = Signal duration time
1 = Recall start time
#22
System Hold Recall
(001-255: 10-2550 sec.) ....1
(001-255: 1-255 sec.).........2
(000: Not assigned)
2 = Signal duration time
#23
Unannounced Transfer Recall time (000-255: 0-2550 sec.)
#24
Announced Transfer Recall time
(001-255: 10-2550 sec.) (000: I-Hold transfer disabled)
#25
Call Duration Start time
(001-180: 1-180 sec.) (000: Not indicated)
1 = CO Line
#26
Flash time
(001-250: 30-7500 ms)
(000: Not assigned)
2 = PBX Line
01 = Minimum call
duration time
#27
SMDR timer
(01-60: 1-60 sec.)
(000: Not assigned)
02 = Inter-digit time
#28
Unanswered time
(001-255: 1-255 sec.) (000: Time out disabled)
#29
Attendant Reverting time
(001-225: 1-255 sec.) (000: Time out disabled)
1 = Automatic answering time
#30
Voice Message time
(001-255: 1-255 sec.)
(000: Time out disabled)
2 = DT sent time
1 = Path connection waiting time
#31
Trunk-to-Trunk Cut-off timer
(001-255: 1-255 sec.)..... 1
(001-255: 1-255 min.) .... 2
(000: Time out disabled)
2 = Path disconnection time
#32
DTMF Receiver release time
(001-255: 1-255 sec.) (000: Time out disabled)
#33
LND/Repeat Dial Hooking time
(001-010: 1-10 sec.) (000: Not time out)
1 = Waiting time
2 = Calling time
#34
Repeat Dial timers
(000 : No function)
001-255: 1 - 255 sec. Or
: 1 – 255 times
3 = Repeat dial times
#60
Polarity Reverse Detect time
(001-255: 100 ms-25.5 sec.)
To Next Page
Loading...