Other Features
¾ 4-83 ¾
u
Room Monitor
DESCRIPTION:
Room Monitor lets one extension monitor (listen to) the sounds in a room containing another extension.
STATION APPLICATION:
KTS, SLT
OPERATION:
To activate Room Monitor at monitored extension:
<SLT>
1. Off-Hook condition. (Busy tone is heard)
Note 1: Room Monitor is not available while the SLT is busy on Intercom call, on a Trunk line call, or dialing.
Note 2: KTS can be monitored by only KTS in another method. Refer to “Room Monitor” on Page 4-52.
To activate Room Monitor at monitoring extension:
<SLT on Dial Plan 1>
1. Lift the handset.
2. Dial 7.
3. Dial the monitored SLT extension No. (Busy tone is heard)
4. Dial 2.
<KTS, SLT on Dial Plan 2>
1. Lift the handset. (See Note)
2. Dial the monitored SLT extension No. (Busy tone is heard)
3. Dial 2.
Note: If Program #75-D=0 (No tone), press ICM key after lifting handset. (KTS)
To cancel Room Monitor at monitored and monitoring extension:
1. Replace the handset.
RELATED SYSTEM DATA:
#19-D: Room Monitor
u
Attendant Call
DESCRIPTION:
Attendant Call allows extension users to call attendant extension by dialing a single digit.
STATION APPLICATION:
KTS, SLT
OPERATION:
To place an Attendant Call : (#78-D=1)
<KTS>
1. Press ICM key.
2. Dial 0.
To Next Page
Loading...