¾ 7-1-11 ¾
Display Indication for Caller-ID Information
[ DESCRIPTION ]
When the system receives an incoming call, a line key on the Key Telephone indicates busy status.
Then indication of line key will be changed to incoming status after receiving Caller-ID information
from a PTT's line and display of the Key Telephone sets indicates the Caller Number (and/or
Name) then user can answer the call.
If a Caller-ID information is not received within preset time (by Program #74-1), a line key
associated with incoming call indicates normal incoming status and Key Telephone user can
answer the call normally.
[ OPERATION ]
1. To show the Caller-ID information at the ringing extension.
1) When Caller-ID information is received (Caller's Name Information: Exist)
Display Indication Operation and Information
##SUN# 25# 12:00PM
10##############
(On-Hook condition)
XXXXXXXXXX######
YYYYYYYYYYYYYYY#
1. While incoming call is being received.
* Display status can not be changed by pressing CHECK
key.
NO# NUMBER# INFO#
YYYYYYYYYYYYYYY
2. If caller's Telephone Number has no information, the
display will be indicated as shown;
Note: Indication contents are as follows;
XXXXXXXXXX: Caller's Telephone Number (Maximum 10 digits)
YYYYYYYYYYYYYYY: Caller's Name (Maximum 15 digits)
To Next Page
Loading...