Nitsuko 1232 - Transfer; Intercom Calls; Conference

8. PAGING
8.1 Paging
To make a page:
- Dial Plan 1 -
1. Lift handset.
2. Dial 7.
3. Dial Paging code (80-87).
4. Make announcement and hang up.
- Dial Plan 2 -
1. Lift handset.
2. Dial Paging code (80-87).
3. Make announcement and hang up.
8.2 Meet-Me Answer Paging
To initiate Meet-Me Answer:
- Dial Plan 1 -
1. Lift handset.
2. Dial 7.
3. Dial Paging number (80-87) and "#".
4. Do not hang up. Wait a reply.
- Dial Plan 2 -
1. Lift handset.
2. Dial Paging number (80-87) and "#".
3. Do not hang up. Wait a reply.
1. TRUNK LINE CALLS (Cont'd)
1.4 Flash
To send Flash signal to Trunk line:
- Dial Plan 1, 2 -
1. On the CO or PBX line.
2. Flash Hookswitch.
3. Dial 90.
1.5 Dial Block
To set Dial Block:
- Dial Plan 1 -
1. Lift handset.
2. Dial 65 and Personal Code.
3. Hang up.
- Dial Plan 2 -
1. Lift handset.
2. Dial 055 (955) and Personal Code.
3. Hang up.
To reset Dial Block:
- Dial Plan 1 -
1. Lift handset.
2. Dial 66 and Personal Code.
3. Hang up.
- Dial Plan 2 -
1. Lift handset.
2. Dial 056 (956) and Personal Code.
3. Hang up.
Personal Code is 4 digits.
- 9 - - 2 -
5. TRANSFER
To Transfer:
- Dial Plan 1, 2 -
1. On the Trunk line.
2. Flash Hookswitch.
3. Dial extension number.
4. Hang up.
To answer transferred call:
- Dial Plan 1, 2 -
1. Lift handset.
6. CONFERENCE
A maximum of 6 parties can join Conference.
6.1 Add-On Conference
To set Add-On Conference:
- Dial Plan 1, 2 -
1. On the Trunk line.
2. Flash Hookswitch.
3. Dial 93 and dial extension number of
another inside party.
4. Flash Hookswitch,
5. Conference established. To add more
inside parties, repeat steps 2-5.
2. INTERCOM CALLS (Cont’d)
2.4 Intercom Camp-On
To set Camp-On:
1. On the Intercom calling (Busy).
2. Dial "
*
" and keep holding the handset.
When the other extension hangs up, this
extension rings. And you will hear ring back
tone.
Intercom conversation is established when the
other extension answers the call.
To cancel Camp-On:
1. Hang up.
2. Lift handset and hang up.
2.5 Intercom Callback
To set Callback:
1. On the Intercom calling (Busy).
2. Dial "
*
" and hang up.
When the other extension hangs up, your
extension rings. If you answer it, the other
extension rings.
Intercom conversation is established when the
other extension answers the call.
To cancel callback:
1. Lift handset and hang up.
- 7 - - 4 -