Trunk Outgoing Call
¾ 4-4 ¾
OPERATION:
To place an outside call:
<KTS>
1. Lift handset or press SPK key.
2. Press an idle Line key.
3. Press DC key.
4. Dial abbreviated number. (00 to 99) or (000 to 199)
<SLT>
1. Lift handset.
2. Dial function code. (See Note 1)
3. Dial queuing group number (0 to 6). (See Note 2)
4. Dial abbreviated number. (00 to 99) or (000 to 199)
Note 1:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 5
0093
Dial Plan 2
1903
Note 2: Queuing group numbers are 0 - 6 (0: Any line, 1-6: Queuing group No).
To store abbreviated number
(Extension #10 only):
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note 1)
3. Press DC key and
*
.
4. Dial abbreviated number. (00 to 99) or (000 to 199)
5. Dial phone number to be stored. (see Note 2)
6. Repeat steps 3 to 5.
7. Press SPK key to exit from Abbreviated Dialing entry.
Note 1: If Program #75-D is 0 (No tone), skip Step 2. (TX-Z 824/1232/2464)
Note 2: You can enter pauses (TRFR key), flashes (FLASH key) and stops (CONF key) when storing a Abbreviated
Dial number. Each pause, stop or flash counts as a digit when totaling the number of digits in a Abbreviated
Dial number. When stop is inserted, dialing will be stopped this position and can be continued by dialing.
RELATED SYSTEM DATA:
#08-B: SLT Dial Plan Set
#17-D: Storage Quantity of Abbreviated Dial
#18-C: Abbreviated Dialing Restriction
n
nn
n One-Touch Dialing
DESCRIPTION:
One-Touch Dialing allows you to store ten of your most frequently called outside numbers as personal
abbreviated dial numbers at your extension so you can call them with just a single touch. Dial number to
be stored is up to 18 digits including pauses (TRFR key), flashes (FLASH key) and stops (CONF key).
The One Touch Dial numbers are stored under the ten One -Touch keys (No.1 to No.10) as F01 to F10.
When the number of common Abbreviated Dialing is set to 100 in Program #17-D, the memory for the
remaining 100 numbers can be used for personal abbreviated dial numbers at 10 Key telephones. The
assigned Key Telephone user can store up to 10 more dial numbers under ten One-Touch Keys as F11
to F20. When dialing, the user must press OPAC key before pressing an One-Touch Key.
STATION APPLICATION:
KTS
To Next Page
Loading...