Hold/Transfer/During Conversation
¾ 4-28 ¾
<SLT>
1. Establish first outside call.
2. Flash Hookswitch.
3. Dial 94 and press 2-digit line No.
4. Establish second outside call.
5. Flash Hookswitch. Conference established.
To add inside parties to a Multi-Line Conference:
<KTS>
1. Press CONF key. Conference is put on Hold.
2. Press ICM key. Hear dial tone.
3. Dial extension number. Called party must lift the handset to answer.
4. Press CONF key. Conference is re-established. To add more inside parties, repeat steps 1-4.
<SLT>
1. Establish outside call.
2. Flash Hookswitch.
3. Dial 93.
4. Dial extension number of invited inside party. Called party must lift the handset to answer.
5. Flash Hookswitch. Conference established. To add more inside parties, repeat steps 2-5.
RELATED SYSTEM DATA:
#16-E: Multi-Line Conference
u
Internal Conference
DESCRIPTION:
Internal Conference allows a multiple-party Intercom conversation. An extension user can establish an
Internal Conference with up to five other extension users (i.e., for a total of six internal parties).
STATION APPLICATION:
KTS, SLT
OPERATION:
To establish an Internal Conference:
<KTS>
1. Establish Intercom call. The called party must answer using the handset.
2. Press CONF key. Hear dial tone.
3. Dial extension number of another internal party. The called party must answer using the handset.
4. Once the called party answers, Conference is established. To add more internal parties, repeat steps
2-4.
Note : If Manual Mode (Program #80-01-D = 0) is assigned, Conference initiator must press CONF
key after the called party answers to establish an internal conference.
<SLT>
1. Establish Intercom call. The called party must answer using the handset.
2. Flash Hookswitch. Hear dial tone.
3. Dial extension No. of another internal party. The called party must answer using the handset.
4. Once the called party answers, Conference is established. To add more internal parties, repeat steps
2-4.
Note : If Manual Mode (Program #80-01-D = 0) is assigned, Conference initiator must flash
Hookswitch after the called party answers to establish an internal conference.
To join an Internal Conference when invited:
<KTS, SLT>
1. Lift handset and wait.
RELATED SYSTEM DATA:
#80-01-D: Internal Conference Mode
To Next Page
Loading...