Hold/Transfer/During Conversation
¾ 4-21 ¾
n
nn
n Hold
u
System Hold
DESCRIPTION:
System Hold puts an outside call on Hold so that it can be picked up from any extension in the system. If
the System Hold Recall program is enabled, a call left on System Hold longer than a programmed period
of time re-rings the extension that placed it on Hold.
STATION APPLICATION:
KTS, SLT
OPERATION:
To put a call on System Hold:
<KTS>
1. Press HOLD key.
2. Hang up. Line key flashes fast at this KTS and slowly at the other KTS in the system.
<SLT>
1. Flash Hookswitch.
2. Dial 91.
3. Hang up.
To retrieve a call on System Hold:
<KTS>
1. Lift handset.
2. Press flashing Line key.
<SLT>
1. Lift handset.
2. Dial function code. (see Note)
Note:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 61
0 0 951
Dial Plan 2
1 9 051
RELATED SYSTEM DATA:
#16-B: Recall Trunk Off-Hook Access
#22: System Hold Recall
u
Automatic Hold
DESRIPTION:
Automatic Hold lets the KTS put an outside call on System Hold quickly without pressing the HOLD key in
order to place an internal call. If necessary, holding operation can be ignored within the assigned timer by
programming after placing an outside call. In that case, assigned extension(s) can still hold calls in spite
of the setting in #87.
STATION APPLICATION:
KTS
To Next Page
Loading...