¾ 7-2-1-3 ¾
Fax Machine Installation
G3 type Fax machine is connected to one of the extension ports.
Note :
If G2 type Fax machine is connected to the system, the incoming Fax call may not
automatically be transmitted.
Installation Notice
>
After all installation have been completed, plug the AC cord into AC outlet.
> When you install a 3FAXU-A1 card to TX-Z 308 Main Equipment, it is required to connect
the AC cord to Commercial Power for more than 1 day to charge a Ni-Cd battery. Unless
otherwise the back-up battery can not be performed sufficiently.
IMPORTANT !! : Incoming Ring Times must be set “1 Time” at the Fax Machine.
IMPORTANT !!
G3 type Fax machine should be
connected to one of the extension ports
except TEL 1, TEL 2 port.
To Next Page
Loading...