Nitsuko 1232 - How to Record VAU Message

¾ 7-3-1-2 ¾
How to Record VAU Message
- To Record VAU Message
Display Indication Operation and Information
##SUN# 25# 12:00PM
REC.DISA.MSG#>##
1. Lift handset or press SPK. (See Note)
2. Dial 930.
If Busy
- VAU unit is not inserted in the system.
- Voice Paths are occupied.
- User operates at extension other than #10.
##SUN# 25# 12:00PM
REC.DISA.MSG#>01
3. Dial VAU Message No. (01 - 24)
(For Example : Message No. 01)
(Refer to "Table of VAU Message".)
00:00:00# 12:00PM
REC.DISA.MSG#>01
4. Dial *. (Recording and timer counting start.)
5. Record a message from handset or microphone.
If Busy
- User dials Message No. other than specific No.
00:00:10# 12:00PM
REC.DISA.MSG#>01
6. Dial *. (Recording and timer counting finish.)
Return to Step 4.
Information
- If user dials “#” instead of "*", recording contents
will not be recorded and
Dial Tone may
be sent.
##SUN# 25# 12:00PM
10##############
7. Hang up or press SPK.
Information
- When user hangs up or presses SPK without dial
* or #, the recorded message will be saved.
- When 16 sec. has passed during message
recording, timer counting will automatically be
finished and the recorded message will be saved.
Note : When Program #75-D is 0 (No tone), press ICM
key to seize Intercom after lifting handset.